Top 10 Best Camera Mount For Desk In 2024

Features :

• STABLE & STURDY MOUNT: JINSUI camera desk mount is made of sturdy and lightweight aluminum alloy, which is durable and has a more textured overall. The table stand with 3 sections strong tube (diameter 25mm/22mm/19mm) ensures better stability and prevents your device from shaking.
• ADJUSTABLE HEIGHT: The desk light stand provides a height adjustable range from 14.4inch/36.5cm to 32.3inch/82cm, and 3-section thick extension pole makes it easy to carry and store. It provides the possibility for any overhead shooting and lighting. You can easily change the height of the desk clamp camera mount for a great work place.
• C-CLAMP SAVES DESK SPACE: The C-clamp is suitable for the table thickness up to 2inch/5cm, you can adjust the knob on the bottom of the dslr camera desk mount to fit different tables. It saves your space than the tripod. The C-clamp with rubber pads is non-slip and don’t damage tabletop.
• 360° PANORAMIC BALL HEAD: The high quality ballhead with top 1/4″ screw ensures 360° rotation for panoramic shooting, or tilt up and down 45° or 90°. You can easily change the angle of devices like mobile phone to get the perfect shooting angle. The payload capacity is up to 4.4lbs/2kg.
• WIDE COMPATIBILITY & APPLICATION: JINSUI overhead camera mount is great for supporting ring light, DSLR camera, microphone, smartphone holder, webcam, etc. You can use the c clamp desk mounted light stand for makeup, live streaming, photography and more. Note: 12 months warranty for manufacturing defects. If you have any questions, please feel free to contact us.

Features :

• Desk mount stand 17.3-41.3 inch adjustable, gives you ample height for overhead shooting and lighting. And 14 inch auxiliary holding arm for cameras, lights, phone and More.
• Desk mount stand and auxiliary holding arm all have standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4” adapter. Comes with phone grip, 2.2-3.9 inch can work with most smartphones.
• Secure more gear to your Desk mount stand. A single steel pole that clamps horizontally onto Desk mount stand, solid arm provides an auxiliary mounting point for a camera, light or smartphone and more.
• The arm can be installed at the lower two sections of the main pole to ensure stability(Height up to 28.7 inch), can not be clamped to the top section. The arm optimal load-bearing 1KG(2.2lbs) and Max 1.5KG(3.3lbs), so heavier equipment can be mounted on the pole top, and lighter equipment on the arm for stability.
• This camera&cellphone desktop overhead video stand suitable for baking, crafting, online lesson, document display, live stream broadcast, video recording, phone scanning and other scenes.
• NOTE: It is recommended to adjust the your required height of the Desk mount stand before installing the Auxiliary holding arm. And if you need adjust the height of Desk mount stand, first please loosen the screw of the Auxiliary holding arm, otherwise the stand height cannot be adjusted.
• NOTE: DSLR Cameras, Phone, Lights Not included.

Features :

• 【Flexible Articulating Stand】 3-Section Overhead Camera Desk Mount Takes up less desk space. Single arm length: 12.6″, fully extended length: 35.4″. The stand can be folded into 13.8″, for space saving storage. The top and bottom of the stand are 360° rotatable，No need to add additional rotating ball head. Excellent flexibility, Can meet your shooting needs at any angle.
• 【Sturdy & 18lb Load】High-precision CNC machining, Firm seams, Can bear a load up to 16lb/7.2kg in a horizontal state and a maximum load of 22lb/10kg, Has amazing stability, Not leave you worried that it will fall. which is 3 times higher than its counterparts. Joints are firmly locked by gear to make sure your camera, ring light, and other devices are securely stabilized during use.
• 【Widely Used】 Comes with 1/4″, 3/8″, 5/8″ screw & spring loaded phone holder. The overhead camera rig can hold a full size DSLR camera with no issues, And even smaller video cameras/Webcam/Projector/Phone/Video light /Microphone etc devices, for Video recording, YouTube, Live streaming, Online lesson, Baking, Vlogging.
• 【Stable Aluminum Padded Desk Clamp】With padded to protect your device or table from scratches. Dimensions can be extended up to 2.4in/6cm in height, The camera arm desk mount contains a sleeve into, It is clamped similar to the twist-lock on tripods. The twist-lock is so secure that it prohibits rotation of the entire dslr desk mount, Keeping it securely in place.
• 【NOTE】① The assembly operation is simple, The camera mount arm pieces are lightweight and easily to travel with if needed. ② When not in use, Without having to loosen anything. You can simply keep the bottom cam loose and then swivel at will.

Features :

• [Multifunctional Desktop Stand] The desktop light stand is equipped with a 1/4″ ball head and a ring light adapter, which can be used for ring lights, DSLR cameras, smart phones etc. Suitable for beauty shooting, live broadcast work, interviews, etc.
• [Height Adjustable Camera Table Mount] The camera light stand is designed with 3 sections extending poles. You can adjust the height of the stand according to your own shooting needs. The height adjustment range is: 19″-39″ / 48.5cm-100cm(Note: height with ball head and C-Clamp). The operation is simple, and the rubber ring wingnut helps you easily adjust and fix the length of the support rod.
• [Angle Adjustable Camera Table Stand] Thanks to the ball head (1/4″ screw), you can freely adjust the angle of the product, so as to achieve 360° panoramic rotation shooting. -90°/+45° front tilt for multi-angle adjustment, this design helps you to easily adjust the equipment without disassembly. The maximum load capacity can reach 6.6 pounds/3kg.he ball head is detachable, you can remove it to equipe another device of 1/4″-20 threaded hole, for exemple: 1/4″-20 fluid head.
• [Desk Camera Mount] There is a width adjustment button at the bottom. This design can help you adjust the width of the camera bracket to adapt to tables with different thicknesses. It is suitable for tables with a thickness of 5cm / 2″. Compared with the traditional light tripod, this product is more save space.
• [Lightweight Desktop Camera Stand] The table camera stand is made of aviation aluminum alloy and has a long service life. The matte surface is easier to clean. It weighs only 15 ounces/430 grams, making it easy to carry.

Features :

• 【Two in One Table Mount】The extendable desk mount is equipped with one 1/4″ ballhead and one adapter for ring light, which is a perfect choice for supporting ring light, DSLR camera, smartphone, panel light, etc. It is suitable for making up, live streaming videography, photography, or other shooting work.
• 【Height Adjustable】The desktop light stand is designed with 3 sections extending poles, with a height-adjustable from 19″-39″ / 48.5cm-100cm(Note: height with ball head and C-Clamp), which provides the possibility for any overhead shootings and lightings. A rubber ring wingnut helps you to fix the pole easier.
• 【360° Swivel Detachable Ball head】The ball head with top 1/4″ screw ensures 360° panoramic rotation for panoramic shooting, -90°/+45° front tilt for multi-angle adjustment, which helps you to easily adjust your device without removing them. The maximum load capacity is up to 6.6 pounds-22 pounds-/3kg-10kg. The ball head is detachable, you can remove it to equipe another device of 1/4″-20 threaded hole, for exemple: 1/4″-20 fluid head.
• 【Desk Light Mount Clamp】The camera mount is adjustable for fitting different tables through adjusting the knob at the bottom, suitable for the table thickness up to 5cm / 2″. Save your space than the light tripod.
• 【Tough& Durable】Made of aviation aluminum alloy material, with the strong tube (diameter 19/22/25mm), it is more durable and stable to use and ensures a long time use without getting rusty. The matte surface is easier to clean without leaving any fingerprint. Weights only 15oz / 430g, easily to carry around with you.

Features :

• Camera desk mount stand Up to 27.56 inch center shaft height ,no limit shooting from any angle or distance. 29.53 inch super long extending arm, three stages free adjustments,challenge and inspire your creativity.
• Compatible with ring light, DSLR camera, video camera, panel light, key light, webcam, and more. also also also The Pole top has 1/4 screw hole, you can mount other equipment.
• 360° Ballhead adjust to any angle and 1/4″ Screw allows you to expand your rig. And padded desk clamp expandable up to 5cm/1.96 inch.
• Aviation aluminum alloy material, extremely sturdy and durable, single-arm load-bearing capacity is up to 2KG(4.41lbs)–Suitable for almost all cameras.
• This camera desktop overhead video stand suitable for baking, crafting, online lesson, document display, live stream broadcast, video recording and other creating top-down video/photo scenes.
• NOTE: Webcam, Panel light, Ring light, DSLR camera Not included.
• Warranty & Service: Enjoys a Full 12-month warranty from JUSMO; 24 hours/day online after-sale service team for you.

Features :

• 🏆【Super Long Adjustable Range】: VIJIM dslr desk mount with 18.3 to 48.8 in. super long adjustable range, and 3-section telescopic pole adjustability for cameras/lights/webcam etc.
• 🏆【360° Ball Head】:The camera desk mount with a removable 360° panoramic ball head. It with an industry-standard 1/4″ Screw allows you to expand your device.
• 🏆【Stable Aluminum Padded Desk Clamp】: The Aluminum tabletop light mount with padded desk clamp, it is expandable up to 5 Centimetre/19.7 inch, compatible with most desk in the market and provides maximum stability.
• 🏆【Come with Phone Mount】: Our desktop camera mount come with a Quick-clamping phone mount, it fits all phones with a maximum width of 3.94 inch. Padded grips protect your phone.
• 🏆【Space Saver for your Studio】: Our desk webcam mount made of aluminum alloy, it is stable enought for any devices. 1/4 screw ball head for cameras, webcam, pannel light, ring light, DSLR, gopro, iphone, andriod etc.

Features :

• 【Sturdy & 5 lbs Load】 This over head camera mounts are upgraded heavy duty design and made of durable metal; With strong spring, the enhanced arm can support max 5 lbs, can hold most DSLR SLR Mirrorless Cameras like Canon Rebel T6 T7 T8i EOS M50, Sony A6000, Nikon D5600 D3500 and so on
• 【Adjustable Mounting】This dslr mount is flexible with 2 arm, each arm is 13.7inch and reach a max height 31.5inch extension; you can adjust the swing arm angle and height as your wish to meet your different application scenarios like video recording, live streaming, baking
• 【With 1/4 Thread Head】This top view tripod has a universal 1/4-20 screw head adapter, it is also compatible with dslr, slr, ring light, led video lighting, projector, gopro action cameras, lightweight cam, webcam
• 【Tabletop Mounted Rig】The desktop tripod can be mounted to your table with max thickness 2 inch; The Jaw Clamp is made of alumium which is lighter, a soft EVA pad to protect the surface, securely clamp on the headboard, nightstand, desk, kitchen counter, workbench etc
• 【Wide Application】 The overhead clamp camera tripod is widely use in different applications like overhead video shots, make great baking crafting demo videos, live stream, online lesson, YouTube videos, cooking video, videography, photography, vlogging, video shooting; A necessory camera gear for YouTubers, Creators, Filmmakers

Features :

• Desktop C-clamp Stand Top with 1/4” thread. And asy to install microphone, Led video light, monitor to DSLR, camcorder or digital camera. The 360°ball head can ensure 360 degree horizontal rotating and 180-degree bending to any angle for photography. The hot shoe compatible with female 1/4″-20 threads mounts any item With a female 1/4″-20 Thread to the camera hot shoe.
• 【Adjustablement with Locking Knob】Desk mount stand can be adjusted to any height within seconds as needed. Extended from 15.5 to 25.5 Inch as you need.
• 【Flexible Position 】Mounts to the back of your desk (range from 0.5 to 3.5” thickness) via a heavy-duty C-clamp. The clamp with sponge pad to protect your furniture from scratch, allowing you to securely clamp it on the desk, table, bed headboard, nightstand, kitchen counter etc.
• Made of highly-durable aluminum-alloy material with stainless steel, using a more stable structure. the hot shoe and c clamp clip with rubber-padded mount on the top to protect your equipment or table from potential scratches between your camera and the mounting part.
• 【Package List and Service】Ball Head, Hot Shoe, Desk Light Stand. Welcome to send email to us when you have questions.

Features :

• 【What You Get】(1 x)C-Clamp / (1 x) Camera Desktop Mount Stand / (1 x) Overhead Holding Arm / (1 x) Holding Arm adapter / (1 x) Phone Holder / (1 x) 360° Ballhead.
• 【Multiple Combinations】More chooses for you. With a camera desktop mount stand, you can put a lightweight camera on it; With a overhead holding arm, you can install a 360° Ballhead on it to get the best angle and connect with a lightweight ring light, fill light, Webcam as your need. The holding arm bottom has a 1/4” hole to connect the desktop stand and get more high.
• 【Adjustable】JEBUTU upgraded overhead camera desk mount support with 360° Ballhead and holding arm adapter than you can adjust a suitable angle by it. Adjusted the adapter knob at the connect of the overhead holding arm to adjust a perfect angle. Adjusted the adapter at the connect of the desktop stand to get a suitable height.
• 【Upgraded Desk Mount Stand Parameters】The maximum opening of the C-Clamp is about 1.77inch/4.5cm, you can clip it on tables which thickness is less than the opening. The maximum length of the Holding Arm is 13inch/33cm. The height of the desktop stand can be adjusted from 12.79inch/32.5cm to 21.65inch/55cm. The max load is about 0.5Kg.
• 【Widely Application】JEBUTU upgraded camera desk mount is made of high-quality steel and ABS. Suitable for a live web conference, makeup, streaming, online class, drawing, calligraphy, baking, cooking, crafting, videos, etc.